原木门的木门制造技术?
原木门的木门制造技术?
The original wood door of wooden door manufacturing technology?
1.木材枯燥杰出
1. Wood boring outstanding
木门厂家介绍，木材的枯燥工序在原木门制造中关键效果首要体现在三个方面：
Wooden door factory, wood boring process in the manufacture of the original wood door key effect in the first three aspects:
榜首，木材的枯燥质量决议了木材的出材率。特别是关于宝贵树种木材来讲，具有重要意义。复合门
Resolution to the wood, wood boring quality rate of the material. Especially about precious tree species for timber, is of great significance. Composite door
第二，木材的枯燥质量决议了原木门制品的表面质量。
Second, the wood boring quality resolution the surface quality of the original wood door products.
第三，木材的枯燥质量是决议原木门是不是会翘曲变形的决议因素。因而在原木门的制造中首先要严格控制好木材的枯燥工序，既要避免木材枯燥中的开裂变形，又要使其含水率均匀，并且到达各地运用规范改变木材含水率的办法：进行二次烘干，即天然烘干后再进行蒸汽烘干。
Third, the quality of wood boring is resolution of the original wood door is warping deformation resolution factor. In the original wood door in the manufacture of the first to strictly control the wood boring process, both to avoid deformation and crack of wood boring, and to make it uniform moisture content, and to use specification change around the wood moisture content: second drying, the steam drying of the reentry after natural drying.
2.合理选用刀具
2. Select appropriate cutting tools
原木门的制造中，原木门的榫槽加工和外型首要是经过一些成型刀具来完成的，因而刀具合理选用关于原木门的加工精度和装修效果都有直接决议效果。
In the production of the original wood door, original wood tenon chamfer processing and appearance is first after some molding tool to complete, thus cutting tool reasonable choice about the machining precision of the original wood door and decoration effect has a direct resolution effect.
另一方面，刀具切削性能对原木门的表面质量也有很大影响。因此，合理挑选刀具在原木学生产中非常重要。
Cutting tool cutting performance of the original wood door, on the other hand, the surface quality has great influence. Therefore, reasonable selection tool is very important in students during log.
3.涂装最佳选用PU油漆
3. The best choose PU coating paint
油漆做为套装木门工厂加工的后期技术，它的优劣直接影响着最终的运用效果。一起油漆本钱也是木门本钱上最大的有些之一。
Paint as late suit wood door factory processing technology, the use of the pros and cons of it directly affects the final effect. Paint with capital is one of the largest some wooden door on the capital.
油漆的品种大致分为酚醛漆、醇酸漆、硝基漆、不饱和聚脂漆及PU漆。其间酚醛漆和醇酸漆因为漆膜质感及附着力差，根本在装修中筛选，很多运用的是硝基漆、聚脂漆及高级家具上运用的PU漆。
The variety of paint roughly divided into phenolic paint, alkyd paint, lacquer, unsaturated polyester paint, PU paint. Because meantime phenolic paint and alkyd paint film texture and poor adhesion, fundamental screening in the decoration, is a lot of use of lacquer, get together fat lacquer, and senior of the PU paint used on the furniture.
硝基漆因为施工比较简单、合适手艺操作，被大多数手艺装修木做运用，但其漆膜薄，手感不好，效果不理想。聚脂漆相对来讲漆膜厚重，但其稀释剂在蒸发时富含氡气，并且漆膜硬度稍弱。最理想的是PU漆，PU漆不光有聚脂漆的漆膜厚重，附着力强，通明层次好的长处，一起它的密封性好也在木做防潮方面有着非常重要的效果，PU漆的硬度、耐久性、耐黄变性及环保性也是别的油漆无法比拟的，故被高级原木门涂装广泛选用并成为首要涂装原材料之一。
Lacquer because the construction is simple, suitable craft operation, applied by most craft decoration wood, but its thin film, feel is not good, the effect is not ideal. Polyester paint paint film is relatively heavy, but its thinner when the evaporation is a rich source of radon, and film hardness is a bit weak. Ideally PU paint, PU paint not only have a polyester paint film thick, strong adhesion, good lit level strengths, with its good sealing also has very important effect in wood moisture, PU paint hardness, durability, resistance to yellow degeneration and environmental protection is unmatched by other paint, NBA is advanced coating widely use the original wood door and become one of the primary coating raw materials.
